Dodge Crew Cab with 12' Harbor ComboMaster

This truck is a long one. It's a Dodge 4500/5500 Crew Cab Cab Chassis with a Harbor 12' ComboMaster without a rack. A ComboMaster is a Service Body with a 36" work platform on the rear and there are so many contractors who love how that works out for them. Notice the vise on the rear and the wide 8" standard step bumper. Give us a call at 800-433-9452 to order one for your operation, and please visit our website at http://www.htbi.net/

Custom Rack To Front Bumper Rack Assembly

Harbor Truck Bodies builds a lot of racks for our bodies and some people have special needs to carry long items and they need a design that will carry the load and also support its entire length. This is one example of a custom rack that extends all the way to the front bumper. In addition it has an expanded metal stop in the front and notice the "goal posts" in the rear and how the load will be carried on each side, leaving the center area open. Call Harbor at 800-433-9452 for more information and check out our website also at http://www.htbi.net/.

Harbor Crane Body with Venturo Electric ET12KX Crane - Ready For Work!

This is a Harbor Crane Body with a Raised Gas Bottle Compartment and a top mounted Ventura Electric Crane on the right side of the body. This is a vertical series body and has a vertical door in the rear and the horizontal door over the wheel. Notice the bottle brackets and rings and the gas hose reel inside the vented gas compartment. The rear facing surface of the raised compartment is protected from damage with tread plate.

Mounted on the rear right corner is a Venturo ET12KX crane with crane rest. This is a 12,000 ft*lbs crane with 3,500 lb lifting capacity. Electric winch, elevation, rotation and extension.

CRANE SPECIFICATIONS: 3,500 lbs lifting capacity 12,000 ft*lbs crane moment rating Electric winch, elevation, rotation, and extension 7'-15' boom (4' powered, 4' manual extension) 17 ft/min (unloaded) and 13 ft/min (1725 lbs) single line winch speed Electrical requirements: 12 VDC Continuous power rotation with live swivel Overload protection system Anti-Two-Block protection system 25' corded remote standard 65' of 1/4 " aircraft-quality wirerope Meets OSHA 1910.180 and ANSI B30.5 standards Optional Equipment: Outriggers and Mounting Pedestals

There is a Work Platform extension on this body . It is available on any Service Body and provides a great work area for work on the job site. Available with or without a traverse compartment with doors on the sides. This is a relatively inexpensive way to add some great workspace for those who use their truck in the field. The V-Groove makes it easy to keep pipe from rolling and accomodates various sizes of pipe or tubing.The traditional fold-down rear tailgate is replaced by a drop-in gate.

Notice the Rear Grab Handles to help with the step into the rear of the body, the bumper has a treadplate step area and a receiver for the tow hitch. The inside of body is coated with spray on liner.

All in all, this is an awesome selection of features and benefits that could serve you well. Call Harbor at 1-800-433-9452 and visit our website at www.htbi.net.

Harbor WorkMaster As A Rescue Body

Here's a rescue truck packaged and modified by Cascade Truck Body in Eugene, Oregon. The basis of the truck is a Harbor WorkMaster Body. Cascade Truck Body is a Harbor Distributor. Contact them at 541-342-5317 and visit their website at http://www.cascadetruckbody.com/.

Harbor Has Distributors In Montana and Wyoming

Harbor Truck Bodies has distributors in Montana and Wyoming!

Montana Harbor Truck Distributors

Pierce Manufacturing Co
Kalispell MT
406-257-5818


Wyoming Harbor Truck Distributors

Colman Equipment
Casper WY
307-234-3500
www.colmanequipment.com

Need A Harbor Body In Colorado or Idaho?

Colorado Harbor Truck Distributors

Layton Truck Equipment
Colorado Springs CO
719-597-0400
www.laytontruck.com


Maxey Truck & Trailer Equipment
Fort Collins CO
970-493-7510


Idaho Harbor Truck Distributors

Cobalt Truck Equipment
Nampa ID
800-733-0342
www.cobalttruck.com



Harbor Workmaster on Crew Cab With Roof Rack and Conduit Doors!

Here's a nice Workmaster body mounted on a Ford Crew Cab.

This body was upfitted with a nice roof rack that extends over the full length of the crew cab. Notice that it drops down to a lower accessible level over the cab. Access to the roof level is accessible buy a rear mounted ladder on the drivers side.

Inside handles provide help to access to the body interior. Notice the hooks on the rear doors, a nice touch to provide storage and easy retrieval of cables. Check out the conduit doors for placement of the extra long “stuff” and the 5 inch and 3 inch latch-able draw,s perfect for all the small parts.

Visit our website at http://www.htbi.net and call Harbor at 800-433-9452.