3/31/13
Isuzu NPR Walkaround at the 2013 Work Truck Show
3/29/13
Bedslide Presentation at the 2013 Work Truck Show
A Video Presentation of the Bedslide Product Line at the 2013 Work Truck Show
3/27/13
Vanair Product Improvements
Jim goes over the latest inmprovements for the under vehicle PTO air compressor and generators. See more at http://www.vanair.com
3/25/13
Masterack SmartSpace Cargo Management System Introduced at the 2013 Work Truck Show
SmartSpace - A Revolutionary Change in Cargo Storage
SmartSpace
Cargo Management System was developed from the ground up, with the support of
Masterack’s largest fleet, OEM, and distributor customers. The highly
configurable storage system features stackable shelf units, designed for use in
the new high-cube cargo vans coming to market within the next 18 months, which
include the Ford Transit and Ram ProMaster, as well as smaller fleet vehicles
such as the Ford Transit Connect and Nissan NV200.
The new system is engineered
with lightweight materials which provide fuel efficiency over traditional steel
cargo management systems. SmartSpace is modular, giving users the ability to
easily and quickly customize the system for different trades and needs, even
after delivery of the vehicle.
Additionally, the system satisfies Masterack’s
installation partners’ desire to reduce installation time for the system. “Our
customers asked for a cargo management system that would save them time, so we
designed a shelving module that can be installed at 90 or 180 degrees for rear
and side door access,” said Jenn Voelker, Marketing Manager. “We focused on the
details, down to new drawer latches which secure drawers individually and
provide quiet, rattle-free storage.”
For all your Masterack needs, give Harbor Truck Bodies a call at 800-433-9452.
3/23/13
Masterack Van Interiors on Display at the 2013 Work Truck Show
The Latest in Van Interiors from Masterack
Van Partition
Wire Racks Side View
Wire Racks Rear
The latest Masterack commercial van packages were on display at the 2013 Work Truck Show in Indianapolis. Several outfitted vans were on display, including new high vans. Notice also the wire rack package.
Be on the lookout for the next Masterack product introduction, the all-new SmartSpace product line available in late 2013.
For all your Masterack needs, give Harbor Truck Bodies a call at 800-433-9452.
3/21/13
A Harbor Highliner With Plenty of Space
Here is a Highliner Body by Harbor Truck Bodies mounted on an Isuzu chassis.
This Highliner is also outfitted with a sturdy square tubing rack extended over the cab.
The body starts its life as an 11' Service Body with closed top lids and then the upper section is added on with doors that swing up that are particularly useful for certain items. In this case, it is outfitted with some plastic boxes for storage of small items.
.
See more at http://www.htbi.net/, or give us a call at 1-800-433-9452.
3/19/13
Isuzu N-Series Named 3013 MD Truck Of The Year
Isuzu Commercial Truck of America, Inc. is determined to help our customers after the devastating effects of Hurricane Sandy.
Based on Isuzu Motors Limited's experience after last year's tsunami in Japan, Isuzu engineers have developed procedures for customers with vehicles exposed to salt water. Read more...
The Only LCF Trucks With Gas Or Two Diesel PowerTrains
Isuzu trucks provide you with the features you need to help drive up productivity while driving down your cost of ownership. Our engines are legendary for their power, economy and long life. Our frames accommodate a wide range of body applications. Our low-cab-forward design offers a wide range of advantages over conventional truck, pickup or cutaway designs:
- More cargo space within a given overall length
- Tighter turning diameter
- Easy access to the engine through the full 45-degree tilt-cab function that allows quicker service
- Easier entry and exit
- Better visibility
Gasoline Trucks
Isuzu offers the only gasoline-powered LCF trucks in America. The gasoline-powered NPR and NPR-HD deliver unsurpassed performance, exceptional maneuverability and a long list of standard features.
Diesel Trucks
All 2013 diesel models meet EPA 2010 and California Air Resources Board HD-OBD emissions standards and are clean-idle certified. Isuzu NPR ECO-MAX, NPR-HD, NQR, and NRR trucks are also the first in their class to offer Selective Catalytic Reduction (SCR) technology with Diesel Exhaust Fluid (DEF).
Clean, Powerful and Efficient Trucks
So whether you are a small business operator with a single vehicle or you manage an entire fleet, you need trucks that will do more while costing less to operate...and at Isuzu, that's the only kind of trucks we sell.
3/17/13
Cantilever Lift Gate For Panel Vans by Tommy Gate
Tommy Gate Company's all-new Cantilever Series, specifically designed for panel vans. For more information, visit www.tommygate.com
3/15/13
Rugby Rancher Body - What a Beauty!
Here's a Beauty found at The 2013 Work Truck Show in Indianapolis.
Rugby's "Rancher" truck bodies are designed and built for the professional that demands durability, performance and style. The Rugby "Rancher" is built with strong black powder-coated steel or aluminum and features outside stake pockets with tie rails on the sides and rear with an optional recessed compartment with cover for gooseneck hitch and a tapered bulkhead design.
STEEL RANCHER Tapered bulkhead design with tubular side supports and horizontal upper tube Contemporary stop/turn and backup light design Powder coated 90% gloss black for a durable uniform finish
DURABILITY 12 ga. tread plate steel floor 12 ga. smooth steel rear apron with cut-out for stop, tail, turn lights 4" structural channel long rails 3" 10 ga. formed cross sills Tapered bulkhead to reduce wind resistance Bulkhead has center brake (CHMSL) light and two cargo lamps All lighting meets FMVSS–108 standards
CONVENIENCE Rear bumper offers protection and safe access to floor Recessed compartment with cover for gooseneck hitch optional Outside stake pockets with tie rail are installed on sides and rear Built in receiver hitch standard on models with 34" long rail spacing
ALUMINUM RANCHER
STYLE Tapered bulkhead design with tubular side supports and horizontal upper tube Contemporary stop/turn and backup light design
DURABILITY 1⁄8" tread plate aluminum floor 1⁄8" tread plate aluminum rear apron with cut-out for stop, tail, turn lights 7" formed J-channel long rails ¼" Aluminum cross sills (4.75" tall) interlaced with long sills Tapered bulkhead to reduce wind resistance Bulkhead has center brake (CHMSL) light and two cargo lamps
CONVENIENCE Optional recessed compartment with cover for gooseneck hitch Outside stake pockets with tie rail are installed on sides and rear Optional LED lighting
Find out more at http://www.rugbymfg.com/rancher-bodies/rancher-bodies.html Call Harbor Truck Bodies at http://www.rugbymfg.com/rancher-bodies/rancher-bodies.html
Call Harbor Truck Bodies at 800-433-9452 and find us at http://www.htbi.net
3/13/13
Warren Mason Explains The Harbor Trademaster Service Body
A great demonstration of the Harbor Trademaster Service Body by Warren Mason, Sales and Marketing Manager at Harbor Truck Bodies .
See more at http://www.htbi.net
3/11/13
Folsom Chevrolet - A Harbor Truck Bodies Dealer in Folsom, CA
Folsom Chevrolet is proud to serve the Sacramento, Roseville and Auburn region with quality Chevy vehicles. With models like the HHR, Corvette, Colorado, Avalanche, Malibu and Chevy Volt, we have something for every taste and every need. Come visit us at 12655 Folsom Blvd., Folsom, CA 95630 to see our vehicles and take one for a test drive.
If you're looking for used cars in the Sacramento area, we can assist you there as well. Visit our inventory page to see the large collection of pre-owned cars, trucks and SUVs to select from.
Folsom Chevrolet is not just a good choice as your Sacramento Chevrolet dealership, we also provide a full line of services dedicated to our California customers. From auto repair and Chevy service performed by expert mechanics, to OEM Chevrolet accessories and auto parts, to car loan, car leases and financing assistance, Folsom Chevrolet is the smart choice for your next vehicle or other automotive needs.
Come in and say "hi"! We're located at 12655 Auto Mall Circle., Folsom, CA 95630 or you can call us at (800) 924-3895 or (916) 985-5600.
Sales Departments:
916-985-5600
Mon thru Sat 8:30 am to 8:00 pm
Sunday 10:00 am to 7:00 pm
Service Department:
916-985-5600
Monday - Friday from 7:30 am to 6:00 pm
Saturday from 8:00 am to 5:00 pm.
Service Appointment Form: 48 Hours Notice
Quick Lube:
916-985-5600
Monday - Friday 7:00 am to 6:00 pm
Sat 7:00 am to 5:00 pm
* No appointment necessary for added convenience.
3/09/13
Harbor Truck Bodies - The A-OK or All One Key Lock System
The VIDEO SHOWS THE BOLT Padlock 2.0, a New and Improved padlock.
Harbor Truck Bodies offers a wonderful option for our service body
and tool box products: The A-OK Lock System, or the All One Key Lock
System. This is a new lock cylinder of high quality components
manufactured by Bolt Locks, part of Strattec. These locks are also
available in padlock form and the video below shows how those operate.
The locks shown above operate in the same way. Once the ignition key is
inserted and twisted, the lock remembers only that key and then you can
use your ignition key for all the locks on the service/utility body.
Think how great it will be to only need to use that one key for your
truck and all the doors on the service body! No more fumbling for the
right keys.
Harbor Truck Bodies announces a wonderful option for our service body and tool box products: The A-OK Lock System, or the All One Key Lock System. This is a new lock cylinder of high quality components manufactured by Bolt Locks, part of Strattec. These locks are also available in padlock form and the video below shows how those operate. The locks shown above operate in the same way. Once the ignition key is inserted and twisted, the lock remembers only that key and then you can use your ignition key for all the locks on the service/utility body. Think how great it will be to only need to use that one key for your truck and all the doors on the service body! No more fumbling for the right keys.
Call Harbor at 800-433-9452 for more information on this exciting option--the A-OK Lock System.
3/07/13
Pulltarps® From Harbor Truck Bodies
Harbor Truck Bodies sells the original Pulltarps® Truck Tarps
American made Semi-Automatic Pulltarp® Truck Tarp Systems are the original spring return tarping system. These tarp systems operate by manually pulling the tarp out over the load with a pull rope. The tarp is then rolled back into the housing using spring tension within the roller mechanism. Semi-Automatic Pulltarp® Systems are fully upgradeable to electric drive, manual arms, or automatic arms. These truck tarp systems are great for all applications and are the most economical solution to your tarping needs! And tarping your empty trucks can save fuel, that's important for a single truck or a truck fleet. We all benefit with better fuel economy from tarping commercial trucks.
- See more at: http://pulltarps.com/pull-tarp-spring-loaded-truck-tarp-system.htm#sthash.oFsdPGWA.dpuf
We also offer a full line of Manual Arm Systems, Automatic Arm Systems, and Front to Back Cable Systems. So no matter what type of truck or trailer you have and no matter what type of material you haul, Pulltarps has a truck tarp system for you. - See more at: http://pulltarps.com/#sthash.qCzofC1F.dpuf
Manual Arms use the same Pulltarps® semi-automatic roller mechanism to retract the tarp back into the housing. The arms deploy manually by pulling the tarp over the load using the pull rope. Manual arms are great for applications up to 22’. Tarping peaked loads is made easy because the arms lift the tarp up and over the load. - See more at: http://pulltarps.com/manualarmtrucktarpsystems.htm#sthash.ahMhMiyU.dpuf
American made Semi-Automatic Pulltarp® Truck Tarp Systems are the original spring return tarping system. These tarp systems operate by manually pulling the tarp out over the load with a pull rope. The tarp is then rolled back into the housing using spring tension within the roller mechanism. Semi-Automatic Pulltarp® Systems are fully upgradeable to electric drive, manual arms, or automatic arms. These truck tarp systems are great for all applications and are the most economical solution to your tarping needs! And tarping your empty trucks can save fuel, that's important for a single truck or a truck fleet. We all benefit with better fuel economy from tarping commercial trucks. - See more at: http://pulltarps.com/pulltarptrucktarpsystem.htm#sthash.aKXfBLMJ.dpuf
Automatic Arms have an electric motor to retract the tarp back into the housing. The arms automatically deploy the tarp using spring tension within the arm pivot. This entire process is done by simply turning a switch. Automatic Arms are great for any application up to 40'. Tarping peaked loads is made easy because the arms lift the tarp up and over the load. - See more at: http://pulltarps.com/automaticarmtrucktarpsystems.htm#sthash.9VkFqBOt.dpuf
All Automatic Arm sets come standard with Pulltarps Double Wrap Teardrop Technology. A process where the Hem Tube slides into the Universal Teardrop Pullbar and the tarp wraps around the bar twice in order to eliminate bunching and the stress on the stitching. The Urethane Bumpers are then fastened to the pullbar. This keeps the tarp centered and reduces noise. - See more at: http://pulltarps.com/automaticarmtrucktarpsystems.htm#sthash.9VkFqBOt.dpuf
Find out more at Harbor Truck Bodies, ask for Kimberly and her team at 800-433-9452; visit our website at http://www.htbi.net/.
3/03/13
Jimmie Johnson’s Kearny Mesa Chevrolet - A Harbor Truck Bodies Dealer
A Harbor Truck Bodies Dealer in San Diego, CA
Jimmie Johnson Chevrolet is a dealer who consistently stock a good
selection of Harbor Bodies. Because they are a stocking dealer, they receive
special discounts they can pass on to their customers. Give them a call!
Jimmie Johnson's Kearny Mesa Chevrolet
7978 Balboa Avenue
San Diego, CA 92111
Located on Balboa Avenue - West from the 163 and East from 805 freewa
Jimmie Johnson’s Kearny Mesa Chevrolet - serving San Diego, CA
Jimmie
Johnson Kearny Mesa Chevrolet in San Diego would like to thank you for visiting
our website and considering us for the purchase of your new Chevrolet,
certified or used vehicles. It is our goal to provide you with an excellent
purchase and ownership experience. Come see us today and we will help get you
into the new or used vehicle you want.
If
you’re searching for the BEST PRICE on a new Chevrolet or quality pre-owned
vehicle in San Diego, look no further. Our NO-PRESSURE, professional, certified
sales staff is eager to assist you.
We
sell new Chevrolets, both commercial and personal, GM certified and/or
pre-owned Chevrolets, and many other pre-owned makes such as Honda, Toyota,
Dodge, Jeep, RAM, Buick, BMW, Nissan and many more. Our Service, Parts and Body
shop departments are second to none.
|
3/01/13
Lift The Heavy Loads With a Harbor Cranemaster and a Venturo Crane
A CraneMaster body begins as a standardized Harbor TradeMaster Service
Body. This Harbor 11' CraneMaster body
is mounted on a Dodge Ram Heavy Duty 4500/5500 Dually. The crane is a Venturo
ET18KX.The right rear compartment includes special reinforcing for the mounting
of the 18,000 ft. lbs. crane with 4,500 lb. lifting capacity.
The crane has electric functions
for the winch, elevation, rotation and extension. We typically add a leaf to
the spring on the crane side to help keep the body level after the installation
of a crane. Notice the crane rest for cradling the boom. We can also
install outriggers for stability, particularly on larger cranes mounted on higher
bodies.
This unit also has an optional
18" bumper extension with tool box compartments.
Visit our website at www.htbi.net and call Harbor at 800-433-9452.
Subscribe to:
Posts (Atom)