2/28/19

Cummins celebrates 100 years



Cummins kicks off its centennial celebration with a simple message: “Challenge the Impossible.”

2/26/19

Green Truck Summit at the 2019 Work Truck Show

When and where

Tuesday, March 5
JW Marriott Indianapolis
8:30 a.m.–5 p. m.

Green Truck Summit & Fleet Technical Congress Conference & Trade Show Package registrants have the opportunity to attend March 5 general sessions for both events as well as Work Truck Show concurrent sessions on March 5–7.

Learn more at:  http://www.worktruckshow.com/greentrucksummit

2/24/19

VMAC G30 SOLVES COMMON AIR COMPRESSOR CHALLENGES

Common Air Compressor Challenges


To celebrate the recent launch of the VMAC G30 Gas Engine Driven Air Compressor, now powered by Honda, VMAC ran a G30 Giveaway Contest. (Watch the video on our Facebook page!) In this contest we asked entrants to answer three simple questions. One of these questions asked fleet managers and operators what their top challenges with their current truck-mounted air compressors are. Here are the results:

Common Air Compressor Challenges

With seven options to choose from, the top three results were size, air output and weight, accounting for almost 60% of the responses. The VMAC G30 was designed and engineered to address the concerns fleet managers and operators have with their current equipment.

SIZE

VMAC G30 Gas Drive Air CompressorAir compressor size was the number one challenge our survey identified. The VMAC G30 is 50% smaller* than other competitive air compressors, measuring just 34” (l) x 21.5” (w) x 24” (h), making it small enough to fit on the side pack of a single rear wheel service body. The compact size frees up to 15 cubic feet on the truck body, and leaves more room in the back of the truck for supplies, tools, and equipment. Another bonus is that visibility is improved, as the short height of the G30 means it won’t obstruct the view in the rear window.

VMAC G30 Gas Drive Air Compressor

AIR OUTPUT

Not only is the G30 compact, it is also powerful—50% more powerful* than other competitive air compressors. Producing 30 CFM 100% of the time, the G30 can operate at 100% duty cycle, which means you won’t have to wait for air to build, and you can work without interruption, thanks to continuous air supply. The G30 doesn’t need a large air receiver tank either, which aids in the size challenge.

WEIGHT

Weight challenges are minimized with the VMAC G30, which weighs 50% less* than other competitive air compressors. Weighing just 205 lbs (93 kg), the G30 is over 200 lbs lighter. Not only does every pound of GVW count when building a truck service body, especially because vehicle weight restrictions vary by state, but the Environmental Protection Agency reports that for every 100 lbs of weight reduction, a vehicle’s fuel economy can increase by up to 2%. This means that with 200lbs less weight, the VMAC G30 can save you up to 4% in truck fuel costs.

*Compared to competing 22 to 30 CFM reciprocating gas engine driven air compressors, with 30-gallon air receiver tank.

OPERATING IN COLD TEMPERATURES

Respondents in Canada and the Northeast and Midwestern states noted operating air compressors in cold temperatures to be particularly challenging. To ensure the air compressor can operate in extreme cold, a cold climate kit can be installed on the G30. The G30 with cold climate kit is proven to start-up at temperatures of -30°C (-22°F).**

**Due diligence and additional care may be required for prolonged operation in temperatures reaching below -15°C (5°F).

TRANSFERABILITY

The VMAC G30’s lightweight and compact design makes it easier to transfer than heavier air compressors weighing over 400 lbs. The lifting hook makes for easy installation on the service truck as well.

MAINTENANCE

The VMAC G30 is easy to maintain, with servicing recommended every 200 hours or every 6 months. The compressor is oil injected; oil forms a seal between the rotors so they don’t wear against each other. The G30 compressor doesn’t contain any gears, reed-valves, piston rings, or components that will fatigue or become fouled, which means with proper servicing and operation, the compressor should never require rebuilding. The G30 comes with a VMAC Lifetime Limited Warranty, and the reliable Honda GX390 engine comes with a 3-year warranty (limited).

OPERATING IN HOT TEMPERATURES

Operating air compressors in hot temperatures was a concern for some operators and fleet managers, predominately those located in areas like Texas, Virginia, Arizona, and California. The G30 is proven to operate at temperatures up to 40°C (104°F) and is protected by a compressor oil temperature switch that opens at 140°C (284°F) and shuts down and disables the engine until the oil temperature drops below 139°C (282°F).

MINIMIZE CHALLENGES WITH THE VMAC G30

Each of these seven challenges can be addressed with upgrading your air compressor to the VMAC G30 Gas Engine Driven Air Compressor. Not only is it 50% smaller, 50% lighter, and 50% more powerful, but it is also proven to operate in the most extreme climates. It’s also easy to transfer and maintain, allowing you to spend your time on the job, not struggling with your equipment.

Learn more about the VMAC G30, or find a dealer. You can also find a VMAC Sales Rep—they’ll be happy to answer your questions, and provide you with a demo of the air compressor, so you can see the G30 in action for yourself.

2/22/19

Carry It On Top - Masterack Ladder Racks for Every Type of Commercial Van


Masterack has a ladder rack for every type of commercial van, plus accessories to customize a package to your particular need. Choose from the original Masterack Locking Rack, the ergonomic Slide-Down Rack, the effortless PowerRack, or the economical heavy-duty Utility Rack.
 

To find out more, you may call Harbor Truck Bodies at 800-433-9452.
Also find us at http://htbi.net/

2/20/19

Harbor 3-Piece Raised Cargo Bed Enclosure, Material Rack and Conduit Box

Store and Secure your tools, materials and equipment
in your Harbor Service Body








This Harbor body includes an optional 3-piece cargo bed enclosure installed on the service body to keep those items in there out of sight and out of mind. The top opens up two thirds of the bed area when opened and glides smoothly on teflon pads. The other unique thing on this is the way the rear is finished. Most commonly, the rear would be barn doors with no tailgate and this one retained the tail gate also has modified the  barn doors with a HD lock assembly to boot.

This unit has a HD material rack with a conduit box and master lock system to make life easy on the job site.

This rig has plenty of storage and security. See more from Harbor at www.htbi.net

2/18/19

Fleet Technical Congress ar 2019 Work Truck Show

 

Fleet Technical Congress presents strategies and processes to help fleet managers take advantage of the technology revolution and find creative solutions to enhance fleet operations.
Key topics
  • Disaster recovery planning
  • Strategies to secure fuel supplies
  • Using data to design work trucks
  • Ensuring a reliable fleet power supply
  • Last-mile delivery
 Learn more at: http://www.worktruckshow.com/fleettechnicalcongress


2/16/19

Harbor CraneMaster Body - West Coast Style Personalized to Meet Your Every Need...



CraneMaster bodies represent an open design that permits you to choose all the appointments to meet your every need when using 2,000-4,000 lb. cranes with capacity up to 12,000 ft.-lb. The west coast service body design is the preferred style for these cranes. Harbor has sorted out which cranes go with which bodies. Tell us what weight you are loading and what length of crane you need to get the job done (length in feet x weight in lb. = ft. lb.) and we’ll put you in the right combination. Then, we’ll help you choose from among the many options that will make this your personal design!

Find more at: 

http://harbortruckandvan.com/

2/14/19

Harbor Contractor Body Demo - Harbor Truck Bodies



Warren Mason with Harbor Truck Bodies gives us a demonstration of the versitile Harbor Contractor body. See more at http://harbortuckandvan.com

2/12/19

Quick Guide To Industry Acronyms

 Quick Guide To Industry Acronyms


Understanding the many industry acronyms and terms can be overwhelming. This quick guide can get you up to speed on some of the most important terms and meanings.

GVW – Gross Vehicle Weight
This is the total weight of the truck, including all passengers, drivers, cargo, accessories, fuel, and fluid in the engine at any point in time. It is important that this measurement does not go over the GVWR, or it can be a safety hazard.

GVWR – Gross Vehicle Weight Rating
This is the maximum total vehicle weight that is safe for the truck, established by the chassis manufacturer. The weight of the truck, any cargo, and passengers including the driver, as well as any fuel and fluid in the engine is included in the rating. Chassis manufacturers will most often set the GVWR lower than the combined axle ratings (the total amount of weight an individual axle can carry). This is due to the chassis manufacturer’s internal safety standards for durability, stability, and handling, as well as SAE International test protocols.

GCWR – Gross Combined Weight Rating
Everything that moves with the vehicle is included in the GCWR. The weight of the truck, any cargo, passengers including the driver, any fluid or fuel in the truck, as well as the weight of the trailer and the trailer’s cargo is included. Exceeding the GCWR can cause a safety hazard.

Payload
The cargo carrying capacity of a vehicle is the payload. It is calculated by subtracting the vehicles’ weight including passengers and the driver from the GVWR. Exceeding the Payload capacity can cause damage to your suspension, chassis, frame, tires, and many other parts of the truck.

CA – Cab to Axle
The cab-to-axle measurement is the distance from the back of the truck cab to the center of the rear axle. Clear CA or effective CA is the distance from the rear surface of any obstruction behind the cab to the center of the rear axle. If you have a tandem axle truck, then it is measured to the midpoint between the two rear axles. This measurement can help you determine the length of the body that can be mounted on the chassis.

Wheelbase
The wheelbase is the distance between the centers of the front and rear axles. When the truck has more than two axels, it is the distance between the steering axle and the center point of the driving axle group. This can affect body installation, weight distribution, and truck performance.

SRW – Single Rear Wheel
A single rear wheel refers to a chassis that has one wheel on each side of the rear axle. Single Rear wheels make for smoother driving without cargo, as well as easier driving in cities, suburbs, and highways. These trucks are more affordable to purchase outright, and have better fuel economy. A single rear wheel has less towing capability than a dual rear wheel, and less stability when towing in windy conditions.

DRW – Dual Rear Wheel
A dual rear wheel refers to a chassis that has two wheels on each side of the rear axle. This feature is a must if you are towing large payloads, or driving through rough terrain. It adds stability to your truck which increases safety for your divers and cargo. Having a dual rear wheel will allow the driver to safely get off the road in the case of a tire blowing out. Trucks with a dual rear wheel can be difficult to maneuver in cities, where parking and tight streets can be challenging. This feature can also reduce the truck’s mpg, especially in cities, and increase maintenance costs, because there are at least two extra tires to replace or rotate.

CDL – Commercial Driver’s License
The vehicle’s GVWR is one of the factors that will effect whether the diver needs a CDL. If the truck has a GVWR, and GVW of 26,000 lbs. or lower, the driver does not need a CDL.

Class A
A Class A license is required to operate any combination of vehicles with a gross combination weight rating of 26,001 lbs. or more. This includes towing a trailer weighing over 10,000 lbs. which makes the vehicle and trailer rating over 26,001 lbs.

Class B
A Class B license is required to operate a single vehicle with a GVWR or 26,001 lbs. or more, and/or a vehicle with a GVWR of 26,001 lbs. or heavier that is towing another vehicle weighting up to 10,000 lbs.

Class C
A Class C license is required if the vehicle you intend to drive does not meet the criteria for either Class A or B and it is meant to transport either: 16 or more passengers including the driver or hazardous material.

Original Source: NTEA Truck Equipment Glossary


Blog Source: https://www.knapheide.com/news/blog/2018/08/quick-guide-to-industry-acronyms

2/10/19

CargoGlides Extreme Test VS. Competitor



Say goodbye to the aggravation of a normal truck bed. With CargoGlide, you can stop crawling in the back of your truck or van every time you need to reach your gear. So, stop scuffing your knees and hurting your back! Install a CargoGlide in your truck or van and get your gear and materials out where you need them! Loading and unloading your tools, toys or any other materials is considerably faster, safer and easier when you have a CargoGlide.

2/08/19

Work Vehicle Ergonomics - Decked



DECKED drawers slide your payload of tools, gear and other supplies out right at waist height. This white paper, prepared by a third party expert, studies how toolbox solutions like DECKED are shown to save time and money.

DECKED drawers slide your payload of tools, gear and other supplies out right at waist height. This white paper, prepared by a third party expert, studies how toolbox solutions like DECKED are shown to save time and money.


Learn more at: https://decked.com/blogs/decked/ergonomic-white-paper-supports-decked

2/06/19

Air N Arc 250 Walk-Around Video


A brief walk-around video demonstrating the benefits of our ALL-IN-ONE Power System and the advantages this piece of equipment has over the competition.

2/04/19

Air Lift On-Board Air Compressor Systems


Air Lift On-Board Air Compressor Systems! Air Lift On-Board Air Compressor Systems allow you to inflate and deflate your air springs with the touch of a button - for maximum on the go convenience! Tow an Haul with Safety and Comfort - with Air Lift!

2/02/19

Washington Utility Grows Hybrid Van & Truck Fleet

 Puget Sound Energy has expanded its electrified fleet with 40 XL-equipped hybrid Ford vehicles, including Transit vans.

 Puget Sound Energy has expanded its electrified fleet with 40 XL-equipped hybrid Ford vehicles, including Transit vans.
 - Photo courtesy of XL
                                                                 Photo courtesy of XL

XL, provider of connected vehicle electrification solutions for commercial and municipal fleets, announced that Puget Sound Energy (PSE), Washington state’s largest energy provider serving nearly 2 million customers, has expanded its electrified fleet with 40 XL-equipped hybrid Ford vehicles, including Transit vans and F-250 trucks.

With its latest order, PSE now has 110 work trucks equipped with XL’s hybrid technology, with more anticipated being added later this year. XL’s hybrid system has been proven to improve fuel economy by an average of 25% while reducing carbon emissions by 20%, according to the company, and the utility continues to take a leadership role in helping the state of Washington meet its strong sustainability goals.

PSE is supporting these efforts through the electrification of its fleet vehicles. The hybrid vans will support natural gas first responders, and its hybrid pickup trucks will serve natural gas inspectors and related routes, covering about 6,000 square miles over 10 counties and major metropolitan areas.

These vehicles do not have a return-to-base policy, and are typically parked at drivers’ homes since they are needed for emergency response, so it’s helpful that they don’t need a charging station or other hub to deploy them, PSE reports.

“With roughly 43% of carbon emissions in Washington state coming from transportation, we are committed to accelerating the adoption of electrified vehicles,” said Colin Davidson, fleet logistics manager at PSE. “By continuing to upfit our Ford Transit vans and F-250s with XL’s hybrid technology, we will make significant progress towards achieving our goal to reduce our carbon footprint by 50 percent by 2040, without worrying about infrastructure requirements or high maintenance costs.”

Source: https://www.worktruckonline.com/323652/washington-utility-grows-hybrid-van-truck-fleet



2/01/19

Introducing the All-New 2020 Sierra Heavy Duty


Higher trailering capability and confidence are driven by new hardware and technologies


 Expand image


DETROIT — Bigger, stronger and smarter, the all-new 2020 GMC Sierra Heavy Duty combines greater trailering capability with technologies designed to provide customers with a world-class towing experience.

“The all-new 2020 Sierra HD is the most capable heavy-duty truck that we’ve ever offered,” said Duncan Aldred, vice president of Global GMC. “For customers who demand a premium, innovative heavy-duty truck that supports their passions, the next-generation Sierra HD can pull like a pro.”


Form and function come together in the new Sierra Heavy Duty, with features that include:
  • An enhanced ProGrade Trailering system featuring class-leading available 15 camera views, including a segment-first transparent trailer view to virtually see through a trailer in tow.1
  • An available smart trailer designed to integrate the iN∙Command® control system from ASA Electronics2 provides the ability to monitor and control select functions of compatibly equipped trailers through the myGMC mobile app3.
  • A segment-exclusive available 15-inch-diagonal head-up display that offers useful trailering information, including vehicle speed, navigation information and an inclinometer display for the road grade.
  • An available segment-first Rear Camera Mirror.
  • MultiPro, the world’s first six-function tailgate, allows easier loading, unloading and bed access and is available on all trim levels.
  • A larger, commanding design that provides more room for cargo and occupants.
  • Best-in-class Crew Cab front headroom and legroom for the driver and other front-row occupants.
  • An all-new, segment-first, Allison 10-speed automatic transmission mated to the legendary 6.6L Duramax turbo diesel.
·         For those looking to take refined capability off-road, GMC fortifies the new AT4 brand with an all-new Sierra AT4 Heavy Duty available for Crew Cab configurations as both a 2500 and 3500 single rear wheel offering.

With more than half of Sierra HD customers choosing Denali, it continues to offer the ultimate expression of professional grade materials and refinement. The all-new model delivers power, intelligence and segment advancements to meet the needs of heavy-duty customers with discerning taste.

ProGrade Trailering Technology
First introduced with the 2019 Sierra light duty, the ProGrade Trailering System leverages technology advancements to offer additional features and functionality for the 2020 Sierra Heavy Duty.

“Trailering is the most important consideration for Sierra Heavy Duty customers, and the new features and technologies in the 2020 Sierra HD make it easier than ever to hitch a trailer and tow it confidently,” said Jaclyn McQuaid, vehicle chief engineer, Heavy Duty Trucks. “We’ve developed this new truck to offer the greatest trailering experience ever offered by GMC.”

An available class-leading 15 unique camera views1, including an industry-first transparent trailer view, help optimize the driver’s view around the truck and compatible trailers to provide added confidence when towing. The revolutionary transparent trailer feature uses the tailgate-mounted camera and an available accessory camera mounted on the rear of the trailer. The resulting display helps the driver to virtually see through the trailer4, a benefit when navigating parking lots, merging into traffic or making tight turns.

Owners of the 2020 Sierra HD will have access to available smart trailer technology designed to allow access to select features of the iN∙Command® control system from ASA Electronics2 through the myGMC mobile app, either on compatible Android and iOS smartphones or on the vehicle’s infotainment system via Apple CarPlay5 or Android Auto6.  Similar to the features of a smart home, the iN∙Command® control system acts as the central hub of operations to monitor and control an array of systems in trailers equipped with the next-generation technology. Depending on how a compatibly equipped trailer is configured, owners of the 2020 Sierra HD may be able to turn on the trailer’s air conditioning or water heater, check water and holding tank levels, or monitor fuel levels on trailers equipped with generators — all before arriving at their destination.

The ProGrade Trailering System also includes an in-vehicle Trailering App7 with Trailer Light Test, Trailer Electrical Diagnostics, Trailer Tire Pressure and Temperature Monitoring, Pre- Maintenance Reminders and Departure Checklist. Many of the Trailering app’s functions, including the lighting test and pre-departure checklist, are also available with the myGMC mobile app, a feature that offers great convenience when outside the truck or trailer.

Additional available technologies and hardware to aid trailering include:
  • Auto Electric Park Brake to automatically apply the parking brake to help maintain truck position when hitching.
  • All-new Park Grade Hold Assist enhances hill hold by using braking effort at each wheel for an extended period of time.
  • All-new larger, door-mounted trailering mirrors with a four-bar link providing power extend and retract for the driver and passenger sides.
  • Integrated trailer brake controller that works with the trailer profile in the Trailering App to recall a specified trailer’s most recent gain setting.
  • Tow/Haul mode that remains engaged on the next key-on cycle, for up to four hours; includes a reminder the feature is engaged.
  • Hill Start Assist and Hill Descent Control.
  • Trailer Sway Control.
  • Auto Grade Braking and Diesel Exhaust Braking.
  • Digital Variable Steering Assist that dynamically optimizes power steering according to driving scenarios, including trailering, and enables features like road pull compensation.
  • Trailering Info Label placed on the driver’s door jamb that clearly calls out the truck’s specific trailering information, including curb weight, GVWR, GCWR, maximum payload, maximum tongue weight and rear GAWR.8


Bigger and bolder
The 2020 Sierra HD has a commanding, powerful design rooted in a new architecture with larger proportions. It is taller and longer, with a more confident stance defined by a bold design that epitomizes GMC’s signature refinement and technologically driven attention to detail.  

“We took every opportunity to visually express the strength and capability that lies beneath the surface,” says Matt Noone, director of GMC exterior design. “The elevated hood line, the strong shoulders, the striking front grille — these cues communicate the strength and performance that have been engineered and built into each and every Sierra Heavy Duty.”

The all-new Sierra HD is highlighted by new signature lighting, including prominent “light blades” that deliver LED illumination for the daytime running lamps. LEDs are also used for the headlamps, taillamps, available fog lamps and other illuminative elements, including the available roof marker lights standard on all dual-rear-wheel HDs and all Sierra HD Denalis except where prohibited by law. 

Inside, the Sierra HD’s new interior has best-in-class front head- and legroom (maximum), with Crew Cab models. A higher seating position complements the truck’s taller profile to offer a confident view from behind the wheel. Additional optimized ergonomics emphasize easy, intuitive interaction with the vehicle’s available technologies, such as a heavy-duty segment-first head-up display and GMC’s latest touchscreen infotainment systems.9

Denali-exclusive materials — including premium leather-appointed seating, authentic open-pore wood trim and dark-finish aluminum decor — raise the interior’s refinement. The leather appointments have a distinctive, large-pebbled grain with a contrasting stitch pattern that is premium in appearance and touch without sacrificing durability, and the wood trim features an open-pore texture evocative of hand-planed furniture.   

Compared to the current model, the new Sierra Heavy Duty has:
  • A longer wheelbase, a taller, more dominant hood line and taller overall height.
  • A larger grille and complementing functional hood scoop to feed an advanced cooling system for the Duramax turbo diesel. 
  • Class-leading heavy-duty cargo bed volume10 and 12 corner tie-downs with a new, available 120-volt power outlet.
  • One-inch-lower bed lift-in height compared to the 2019 Sierra Heavy Duty, providing easier loading and fifth-wheel and gooseneck trailer hitching10.
  • New, segment-exclusive cargo bed side steps on all box styles, located in front of the rear wheel openings, that complement integrated CornerSteps in the rear bumper to improve access to the cargo area.
  • World’s first six-function MultiPro tailgate available on all trim levels and standard on SLT, AT4 and Denali.

All-new Sierra AT4 HD: Refined HD Capability Off-Road
The all-new 2020 Sierra Heavy Duty AT4 continues the AT4 brand’s growth with a distinctive off-road identity to complement its robust HD capability. Driven by dark chrome exterior finishes and contemporary detailing, Sierra HD AT4 features front and rear bumpers and a grille surround finished in body color. The bold grille design, with its rugged texture, is finished in black chrome and set off by the AT4’s distinctive red vertical recovery hooks.

The athletic interior also carries AT4-specific darkened trim, including dark-tinted and textured aluminum finishes on the steering wheel, center stack and sill plates, as well as a unique Jet Black interior with Kalahari color accents in the seats and live stitching. Leather-appointed seating, with mini-perforated inserts and embroidered AT4 badging on the headrests, along with all-weather floor liners, is standard delivering durability with uncompromising comfort.

The new Sierra AT4 Heavy Duty’s off-road capabilities are rooted in a unique suspension and supporting technologies that include:
  • Off-road suspension, Rancho Shocks, skid plates, Eaton locking rear differential.
  • Eighteen-inch wheels wrapped with Michelin all-terrain tires, with 20-inch wheels available.
  • Traction Select System with specific Off-Road mode.
  • Hill Descent Control and Hill Start Assist.
  • Segment-exclusive 15-inch diagonal Head-Up Display with Off-Road Inclinometer.
  • HD Surround Vision1 for low-speed views of vehicle surroundings.

Confident trailering power
GMC’s legendary Duramax turbo diesel and Allison Transmission pairing continues to offer the ultimate in towing confidence.

The proven Duramax 6.6L turbo-diesel engine offers high torque, high power, low noise and exceptional durability. For the 2020 Sierra HD, the Duramax offers an SAE-certified 445 horsepower and 910 lb-ft of torque. This already powerful engine performs more efficiently thanks to increased cooling capacity delivered in part by improved air induction. A dual-path intake system draws dense, cool air through both the prominent hood scoop and the larger front grille.

The new Sierra HD marks the introduction of an all-new 10-speed Allison automatic transmission — the first-ever offered in the heavy-duty pickup segment. The all-new 10-speed transmission with closer gear spacing allows the engine to operate in an optimal range at all times with varying load and terrain conditions.

The bigger frame, stronger propulsion and smarter technologies are expected to deliver dramatically greater towing capacity than previous models, well in excess of 30,000 pounds. More details regarding an all-new gas engine and trailering capabilities will be announced shortly.  

Coming late summer 2019
The 2020 Sierra HD goes on sale later this year in 2500HD and 3500HD dual rear wheel and single rear wheel configurations. Pricing and complete specifications will be announced later.

With a $1.5 billion investment to support the next-generation Heavy Duty truck launch, Flint Assembly in Flint, Michigan, will proudly build the 2020 Sierra Heavy Duty. 

About GMC
With a strong foundation of manufacturing trucks since 1902 and now selling in a dozen countries across the world, GMC offers purpose-built vehicles designed and engineered to the highest standard. From the all-new compact SUV Terrain to the Sierra HD, our trucks and crossovers deliver GMC’s signature combination of intuitive technologies and premium execution, with the popular Denali sub-brand representing the pinnacle of GMC design, performance and amenities. Details on all GMC models are available at www.gmc.com, on Twitter at @gmc or at www.facebook.com/gmc.