5/30/18

2018 Ford F-150 – Review and Road Test


Despite the F-150’s sales leadership Ford continues to innovate their full-size pickup truck. Combining lightweight aluminum construction and a range of powerful engines with countless bed, cab, and equipment choices there is an F-150 for all needs and budgets. In this video Kelley Blue Book’s Micah Muzio commands the latest F-150 to see if it deserves its status as the king of pickup trucks.

5/28/18

Not too high, not too low: The importance of keeping your truck tire inflation levels just right

 truck-with-bridgestone-tires

A fleet manager’s job is focused on the little things. A tenth of an MPG here, an extended maintenance cycle there—across a fleet, these seemingly small points can add up to significant profits. The same goes for truck tire inflation: a few PSI in the right direction can go a long way, while a few PSI in the wrong direction is potentially disastrous. Tires are one of the most expensive components of the truck, and so the importance of keeping them in the ideal shape should come as no surprise, especially considering the substantial weight that air is supporting.

“Under-inflation is the biggest issue in the industry,” says Sharon Cowart, product marketing director for Michelin Americas Truck Tires. “It is the number one cause of premature tire removal.

Learn more at: http://www.fleetequipmentmag.com/importance-keeping-truck-tire-inflation-levels-just-right/

5/26/18

A Silverado — and an Engine — for Every Need

The all-new 2019 Silverado 1500 offers six engine and transmission combinations, including an all-new 2.7L Turbo, and V-8 engines with industry-first Dynamic Fuel Management offering 17 different modes of cylinder deactivation

2019 Chevrolet Silverado RST

 DETROIT — With eight trims paired with six engine/transmission combinations, even more customers will find a 2019 Silverado 1500 perfectly tailored to their needs for performance, efficiency, technology and value.

“A major focus of the next-generation Silverado is expanding the range of choices,” said Tim Asoklis, chief engineer for the Silverado 1500. “With all-new engines and a broader model range, there’s a Silverado for everyone, whether you’re buying your first pickup or your tenth.”

The all-new 2019 Silverado 1500 propulsion lineup includes: 
•    Over half of the models will be equipped with the most advanced V-8s in the brand’s history: updated versions of Chevrolet’s proven 5.3L and 6.2L engines equipped with industry-first Dynamic Fuel Management featuring 17 different modes of cylinder deactivation.
•    An all-new, advanced 2.7L Turbo engine that replaces the 4.3L V-6 as the standard engine on the high-volume Silverado LT and new Silverado RST, expected to offer 22 percent more torque, greater fuel efficiency and a stronger power-to-weight ratio than the current model.
•    Proven 4.3L V-6 and 5.3L V-8 engines deliver full-size truck capability and performance for the most affordable trucks in the Silverado lineup.
•    An all-new, Duramax 3.0L inline-six turbo diesel will be available in early 2019.

A Silverado — and an engine — for every need
Each engine/transmission combination is matched with exterior design and interior features to create distinct personalities for each Silverado trim, based on three broad customer profiles: High Value, High Volume and High Feature.

High Value — For customers seeking full-size truck capability and the highest level of affordability, the Work Truck (WT), Custom and Custom Trail Boss trims offer two proven engine and transmission combinations:
•    Standard: 4.3L V-6 with Active Fuel Management and a six-speed automatic transmission (SAE-certified at 285 hp/305 lb-ft).
•    Available: 5.3L V-8 with Active Fuel Management and a six-speed automatic transmission (SAE-certified at 355 hp/383 lb-ft).

High Volume — For customers shopping in the heart of the truck market, the LT, RST and LT Trail Boss trims balance technology, efficiency and performance:
•    Standard for LT and RST: All-new 2.7L Turbo with Active Fuel Management and stop/start technology paired with an eight-speed automatic transmission (SAE-certified at 310 hp/348 lb-ft).
•    Standard on LT Trail Boss and available on LT and RST: An updated 5.3L V-8 with Dynamic Fuel Management and stop/start technology with an eight-speed automatic transmission (SAE certified at 355 hp/383 lb-ft).
•    Available on LT and RST: The all-new Duramax 3.0L Turbo-Diesel with stop/start technology paired with a 10-speed automatic transmission will be available in early 2019.

High Feature — For customers shopping for a premium truck, the LTZ and High Country trims offer the highest levels of performance and technology, including:
•    Standard: Updated 5.3L V-8 with Dynamic Fuel Management and stop/start technology  paired with an eight-speed automatic transmission (SAE certified at 355 hp/383 lb-ft).
•    Available: Updated 6.2L V-8 with Dynamic Fuel Management and stop/start technology paired with a 10-speed automatic transmission (SAE certified at 420 hp/460 lb-ft).
•    Available: The all-new Duramax 3.0L inline-six Turbo-Diesel with stop/start technology paired with a 10-speed automatic transmission will be available in early 2019.

Improved Driving Experience
The performance of each engine/transmission combination benefits from a truck that is lighter and more aerodynamic than the previous model.

“With less weight and less wind resistance, we improved the driving dynamics without sacrificing fuel efficiency,” said Asoklis. “The next-gen Silverado is a bigger truck, but the chassis feels more responsive and acceleration is more pronounced. I would argue it’s the best-driving truck we have ever built.”

The 2019 Silverado is larger than before, including a wheelbase that is up to 3.9 inches (100mm) longer, yet overall length is only 1.6 inches (41mm) longer, enabling both more cargo volume and more interior room for all cab lengths. Remarkably, it’s also lighter, weighing up to 450 pounds (204 kg) less than the current Silverado when comparing crew cab V-8 models, due to extensive use of mixed materials and advanced manufacturing.

To improve the aerodynamic efficiency of the next-gen Silverado, the front grille features functional air curtains, similar to those introduced on the sixth-generation Camaro, that reduce wind drag by routing air around the front wheel wells. The powerful side profile also enhances aerodynamics, with an integrated spoiler at the rear edge of the cab that directs air onto the contoured tailgate, reducing wind drag from the bed. Most models also feature active aero shutters integrated in the front grille that close to reduce wind drag and open to provide improved engine cooling when needed. Changes like these result in a 7 percent increase in total aerodynamic efficiency.

From the family of the Most Dependable, Longest Lasting full-size pickups on the road*
For the new Silverado, Chevy set the lofty goal of improving on the legacy of the Most Dependable, Longest Lasting full-size pickups on the road. To do so, the next-gen truck will be subjected to more than 475,000 validation tests and accumulate a staggering seven million miles of real-world testing before the first 2019 Silverado 1500 is delivered to customers.

That includes a battery of tests for the Silverado engines and transmissions that will simulate a range of customer needs:
•    Each type of engine was first subjected to a “torture test” in a dynamometer test cell, running for months nonstop to simulate a lifetime of maximum hot and cold cycles.
•    Each Silverado variant is certified to the SAE J2807 standard for towing and payload capacity. Certification requires a full battery of grueling tests such as the Davis Dam test, in which the truck must carry its maximum gross combined vehicle weight up a 7 percent grade in 110-degrees F (43 degrees C) heat, with no reduction in performance, including air-conditioning.
•    Chevrolet engineers prove every Silverado engine and transmission design for lubrication capability on tilt stands, originally developed for Corvette, that tilt at an angle of up to 53 degrees and can simulate angles at a rate of up to 40 degrees a second — the equivalent of up to 1.4g.

Production plans
Silverado production commences with crew-cab V-8 models starting in the third quarter. In the fourth quarter, production will expand to include regular- and double-cab models, as well as V-6 and 2.7L Turbo engines. The new Duramax 3.0L inline-six turbo diesel will be available in early 2019.

EPA fuel economy estimates and towing/payload capacities are not yet available, and will be announced closer to launch.


* Dependability based on longevity: 1987-July 2017 full-size pickup registrations.

ABOUT CHEVROLET
Founded in 1911 in Detroit, Chevrolet is one of the world's largest car brands, doing business in more than 100 countries and selling more than 4.0 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.

5/24/18

Visit Transfer Flow Manufacturing



Transfer Flow, Inc. is proud to participate in Manufacturing Day by opening our factory to the public for tours. Along with other manufacturers in the area, we all show, in a coordinated effort, what manufacturing is — and what it isn’t. By working together during and after Manufacturing Day, we address the skilled labor shortages we face, connect with future generations, take charge of the public image of manufacturing, and ensure the ongoing prosperity of the whole industry. Together we all help our communities and future generations thrive.

5/22/18

Ranch Hand Intro



The Ranch Hand Bumper manufacturing process.

5/20/18

Ford Restarting F-150, Super Duty Production Ahead of Schedule after Fire at Magnesium Parts Supplier

.
  • Ford is resuming production of the F-150 pickup at Dearborn Truck Plant on Friday. Ford team has also successfully repaired the supply chain for Super Duty; production targeted to restart by Monday for Super Duty at Kentucky Truck Plant and F-150 at Kansas City Assembly Plant
  • Ford marshaled a global team of experts, that included partners and suppliers, following a May 2 fire at Meridian Magnesium Products in Eaton Rapids, Mich., to quickly refurbish and relocate tooling needed to produce parts for the Ford F-150, Super Duty and five other vehicles – Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT
  • Because of this quick action, Meridian is producing truck parts again at its Eaton Rapids facility. Plus, Ford airlifted tooling to a Meridian facility in the U.K. to produce parts for F-150, which will further speed production ramp-up
  • Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT production continue uninterrupted
  • Company reaffirms 2018 adjusted EPS guidance range of $1.45 to $1.70; expects adverse impact of $0.12 to $0.14 per share in second quarter due to lost production  1  
DEARBORN, Mich., May 16, 2018 – Ford Motor Company is restarting production of the popular F-150 at Dearborn Truck Plant Friday after just over one week of downtime. The company has also successfully repaired the supply chain for Super Duty, with production targeted to restart by Monday at the Kentucky Truck Plant as well as the Kansas City Assembly Plant that also makes F-150 pickups.

This follows the massive May 2 fire at the Meridian Magnesium Products facility in Eaton Rapids, Mich.

Ford teams, together with suppliers including Walbridge and other contractors, worked nearly around the clock to get America’s best-selling vehicle franchise back on line as quickly as possible.

The teams removed 19 dies from Meridian’s badly damaged facility, and in one case, moved an 87,000-pound die from Eaton Rapids, Mich., to Nottingham, U.K., via an Antonov cargo plane – one of the largest in the world – in just 30 hours door-to-door. A die is a tool used to cut or shape material using a press.

“Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork,” said Hau Thai-Tang, Ford’s executive vice president of Product Development and Purchasing. “Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets.”

Work started immediately in the aftermath of the May 2 fire. Teams removed and remediated safety concerns – including dangling siding – and restored electricity, gaining approval to access the site while debris still smoldered inside.

This allowed Ford and Meridian to safely retrieve and relocate tools to more quickly resume part production and work to minimize the financial impact of the stalled plants.

Ford recovered, repaired and validated most dies that were at the Eaton Rapids facility, and Meridian is now producing parts for the F-150 at two locations – Eaton Rapids and Nottingham, U.K.

Production of bolsters for Super Duty is also restarting at the Eaton Rapids plant.

Under normal circumstances, moving tooling the size of a bolster die would take approximately 10 days just to get the proper import and export approvals. However, Ford and its suppliers managed to cut the total time for the entire move to 30 hours, including trans-Atlantic flight time.

When the team removed the die from the Eaton Rapids factory, it was shipped to Rickenbacker International Airport in Columbus, Ohio. Rickenbacker had both the capacity to handle such a large piece of equipment and allowed an Antonov An-124 Russian plane, one of the largest planes in the world – typically used to transport trains, dump trucks and even a 25-foot sea yacht – to take off as soon as the equipment was loaded.

Nearly 4,000 miles away, a team in Nottingham was waiting to receive the die and take it to Meridian’s nearby factory. In between, the Ford team received a U.K. import license for the die – a mere two hours before the plane touched down.

Parts produced at Nottingham are being shipped via daily flights on a Boeing 747 jet until production in Eaton Rapids returns to pre-fire levels.

Inventories of Ford’s best-selling F-Series pickups and other vehicles remain strong and customers won’t have a problem finding the model they want.

1 Adjusted earnings per share is a non-GAAP financial measure. Ford does not provide guidance on an earnings per share basis, the comparable GAAP financial measure. Ford’s earnings per share in 2018 will include potentially significant special items that have not yet occurred and are difficult to predict with reasonable certainty prior to year-end, including pension and OPEB remeasurement gains and losses.

Cautionary Note of Forward-Looking Statements
Statements included or incorporated by reference herein may constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995.  Forward-looking statements are based on expectations, forecasts, and assumptions by our management and involve a number of risks, uncertainties, and other factors that could cause actual results to differ materially from those stated, including, without limitation:
  • Ford’s long-term competitiveness depends on the successful execution of fitness actions;  
  • Industry sales volume, particularly in the United States, Europe, or China, could decline if there is a financial crisis, recession, or significant geopolitical event;
  • Ford’s new and existing products and mobility services are subject to market acceptance;  
  • Ford’s results are dependent on sales of larger, more profitable vehicles, particularly in the United States;
  • Ford may face increased price competition resulting from industry excess capacity, currency fluctuations, or other factors;
  • Fluctuations in commodity prices, foreign currency exchange rates, and interest rates can have a significant effect on results;          
  • With a global footprint, Ford’s results could be adversely affected by economic, geopolitical, protectionist trade policies,
    or other events;
  • Ford’s production, as well as Ford’s suppliers’ production, could be disrupted by labor disputes, natural or man-made disasters, financial distress, production difficulties, or other factors;    
  • Ford’s ability to maintain a competitive cost structure could be affected by labor or other constraints;
  • Pension and other postretirement liabilities could adversely affect Ford’s liquidity and financial condition;
  • Economic and demographic experience for pension and other postretirement benefit plans (e.g., discount rates or investment returns) could be worse than Ford has assumed;
  • Ford’s vehicles could be affected by defects that result in delays in new model launches, recall campaigns, or increased
    warranty costs;
  • Safety, emissions, fuel economy, and other regulations affecting Ford may become more stringent;
  • Ford could experience unusual or significant litigation, governmental investigations, or adverse publicity arising out of alleged defects in products, perceived environmental impacts, or otherwise;
  • Ford’s receipt of government incentives could be subject to reduction, termination, or clawback;
  • Operational systems, security systems, and vehicles could be affected by cyber incidents;
  • Ford Credit’s access to debt, securitization, or derivative markets around the world at competitive rates or in sufficient amounts could be affected by credit rating downgrades, market volatility, market disruption, regulatory requirements, or other factors;
  • Ford Credit could experience higher-than-expected credit losses, lower-than-anticipated residual values, or higher-than-expected return volumes for leased vehicles; 
  • Ford Credit could face increased competition from banks, financial institutions, or other third parties seeking to increase their share of financing Ford vehicles; and
  • Ford Credit could be subject to new or increased credit regulations, consumer or data protection regulations, or other regulations.
We cannot be certain that any expectation, forecast, or assumption made in preparing forward-looking statements will prove accurate, or that any projection will be realized.  It is to be expected that there may be differences between projected and actual results.  Our forward-looking statements speak only as of the date of their initial issuance, and we do not undertake any obligation to update or revise publicly any forward-looking statement, whether as a result of new information, future events, or otherwise.  For additional discussion, see “Item 1A.  Risk Factors” in our Annual Report on Form 10-K for the year ended December 31, 2017, as updated by subsequent Quarterly Reports on Form 10-Q and Current Reports on Form 8-K.


About Ford Motor Company

Ford Motor Company is a global company based in Dearborn, Michigan. The company designs, manufactures, markets and services a full line of Ford cars, trucks, SUVs, electrified vehicles and Lincoln luxury vehicles, provides financial services through Ford Motor Credit Company and is pursuing leadership positions in electrification, autonomous vehicles and mobility solutions. Ford employs approximately 202,000 people worldwide. For more information regarding Ford, its products and Ford Motor Credit Company, please visit www.corporate.ford.com.

5/18/18

Electric Powertrains Are the Future. Will Fleets Be Ready?

 Many automakers are making a switch to producing battery-electric and hybrid electric vehicles across all vehicle classes. Image:Josh Bauer/NREL

Most readers of Government Fleet are seasoned professionals pursuing careers either in public fleet management or in corporate roles in support of public sector fleets. For a moment, however, put aside your current career history and aspirations and try to remember when you were a younger person, weighing career options and considering just what path to take.

The public fleet industry is on the threshold of a truly cosmic shift, and it’s quite possible that young people today are looking at our industry and questioning those options. We should, as those young people may be doing, consider what this shift will mean when it occurs.

The shift will be toward a predominance of electromotive powertrain technology and away from the internal combustion engine (ICE). Is it true that the demise of the ICE is greatly overstated, or, should we, like those young people still contemplating their career paths, be reading the tea leaves and presume they portend a very different future for us?

LEARN MORE AT: http://www.greenfleetmagazine.com/channel/electric/article/story/2018/03/electric-powertrains-are-the-future-will-fleets-be-ready.aspx

5/16/18

Advanced Software Design Technology Leads GM into Next Generation of Vehicle Lightweighting


Alliance with Autodesk includes advanced AI-based generative design technology and 3D printing advancements to help lighten and transform future

 DETROIT – General Motors is using new, advanced software design technology to introduce the next generation of vehicle lightweighting. The technology is key to developing efficient and lighter alternative propulsion and zero emission vehicles.

GM is the first automaker in North America to use new generative design software technology from Bay Area-based software company Autodesk. It uses cloud computing and AI-based algorithms to rapidly explore multiple permutations of a part design, generating hundreds of high-performance, often organic-looking geometric design options based on goals and parameters set by the user, such as weight, strength, material choice, fabrication method, and more. The user then determines the best part design option.

“This disruptive technology provides tremendous advancements in how we can design and develop components for our future vehicles to make them lighter and more efficient, said GM Vice President Ken Kelzer, Global Vehicle Components and Subsystems. “When we pair the design technology with manufacturing advancements such as 3D printing, our approach to vehicle development is completely transformed and is fundamentally different to co-create with the computer in ways we simply couldn’t have imagined before.”

GM is leading the industry into the next phase of vehicle lightweighting. The new design technology provides significantly more vehicle mass reduction and parts consolidation  opportunities that cannot be achieved through traditional design optimization methods.

GM is utilizing the innovative technology on future product designs. GM and Autodesk engineers have applied this new technology to produce a proof-of-concept part – a seat bracket – that is 40 percent lighter and 20 percent stronger than the original part. It also consolidates eight different components into one 3D-printed part.

As part of a multi-year alliance focused on innovation, GM and Autodesk will collaborate on projects involving generative design, additive manufacturing, and materials science. Executives and engineers from the two companies will participate in a series of onsite engagements to exchange ideas, learnings, and expertise. GM also has on-demand access to Autodesk’s full portfolio of software and technical specialists.

“Generative design is the future of manufacturing, and GM is a pioneer in using it to lightweight their future vehicles,” said Scott Reese, Autodesk Senior Vice President for Manufacturing and Construction Products. “Generative technologies fundamentally change how engineering work is done because the manufacturing process is built into design options from the start. GM engineers will be able to explore hundreds of ready-to-be-manufactured, high-performance design options faster than they were able to validate a single design the old way.”

GM has been a leading end-user and innovator in additive manufacturing. For more than three decades, GM has used 3D printing to create three-dimensional parts directly from digital data through successive addition of layers of material. GM possessed the first and has some of the auto industry’s most comprehensive 3D printing capabilities in the world with more than 50 rapid prototype machines that have produced more than 250,000 prototype parts over the last decade.

Since 2016, GM has launched 14 new vehicle models with a total mass reduction of more than 5,000 lbs., or more than 350 pounds per vehicle. Most of the weight reduction are a result of material and technology advancements. Of those models, more than half of the vehicles shed 300-pounds or more including the all-new 2019 Chevrolet Silverado, which reduced mass by up to 450-pounds.

Eliminating mass in parts where material is not required for performance combined with parts consolidation yields benefits for vehicle owners including the potential for more interior space and vehicle content, increased range, and enhanced vehicle performance. It also paves the way for new features for customers and provides vehicle designers a canvas on which to explore designs and shapes not seen today.

General Motors Co.  (NYSE: GM, TSX: GMM), its subsidiaries and joint venture entities produce and sell vehicles under the Chevrolet, Cadillac, Baojun, Buick, GMC, Holden, Jiefang and Wuling brands. GM has leadership positions in several of the world's most significant automotive markets and is committed to lead the future of personal mobility. More information on the company and its subsidiaries, including OnStar, a global leader in vehicle safety, security and information services, can be found at http://www.gm.com.
Autodesk (NASDAQ: ADSK) makes software for people who make things. If you've ever driven a high-performance car, admired a towering skyscraper, used a smartphone, or watched a great film, chances are you've experienced what millions of Autodesk customers are doing with our software. Autodesk gives you the power to make anything. For more information visit autodesk.com or follow @autodesk.

5/14/18

CargoGlides Extreme Test VS. Competitor



Say goodbye to the aggravation of a normal truck bed. With CargoGlide, you can stop crawling in the back of your truck or van every time you need to reach your gear. So, stop scuffing your knees and hurting your back! Install a CargoGlide in your truck or van and get your gear and materials out where you need them! Loading and unloading your tools, toys or any other materials is considerably faster, safer and easier when you have a CargoGlide.

5/12/18

PTO Driven Air Compressor Now With Hydraulics: Save 600 lbs in GVW

Reduce Truck GVW By Up To 600 lbs With VMAC’s PTO Driven Air Compressor & Hydraulic Pump

undefined
 When spec’ing out equipment for a medium duty Class 5 truck with a max GVWR of 19,500 lbs, like a Ford F550, every pound counts. Truck upfitters are supplied with a list of required equipment from a customer, and it can be tough to accommodate everything when under tight weight restrictions. Preferring not to upsize to the next weight class, upfitters and customers are always looking to get creative with Lightweighting and save as much weight as possible, while retaining functionality on their service trucks.

VMAC DTM70-H PTO Driven Air Compressor & Hydraulics Saves Weight

VMAC’s Direct-Transmission Mounted PTO Driven Air Compressor & Hydraulics (DTM70-H) weighs only 180 lbs and combines two systems, allowing customers to run both the air compressor and the hydraulic pump at the same time. Combining these two types of power into one innovative multi-power system not only saves space, but also reduces weight on service trucks to save up to 600 lbs. This PTO driven system saves hundreds of pounds of weight as it requires no air storage tank to mount on the truck deck and requires a 50% smaller hydraulic tank size compared to other hydraulic systems.

What would you do with up to 600 lbs of weight reduction on your service truck? Some ideas include:

  •     Carry more materials or equipment
  •     Take advantage of better fuel economy
  •     Install taller tool cabinets
  •     Downsize your service truck classification

More on the DTM70-H PTO Driven Multi-Power System

The DTM70-H is a direct-transmission mounted multi-power system that is designed for the F250-550 Super Duty 6.7L Power Stroke Diesel. As described above, these light and medium duty trucks benefit from lightweighting initiatives, which can help provide more options for customers.

While lightweighting is becoming an increasingly important consideration, the performance of the equipment used cannot be compromised. Here are some fast stats on the DTM70-H:

    Up to 70 CFM @ 175 psi*

        A VMAC North-American made rotary screw air compressor produces up to 70 CFM at 100% duty cycle. This provides enough CFM for air tools such as 1” impact wrenches, 60 lb jackhammers/pavement breakers, backfill tampers, OTR tire inflation, and more.
    Up to 14.9 GPM @ 3,265 psi*
        The DTM70-H control system integrates with standard crane controls for easy and simultaneous operations with the air compressor.

*Dependent on pump size and engine RPM.

Visit the DTM70-H product page for more information, and to request a quote.

5/10/18

Right Van For The Job | Appliances



RAM commercial teamed up with the local charitable organization

5/08/18

2019 GMC Sierra – Ready to fight Ford F-150




GMC is taking its most popular pickup truck to the next level with the completely redesigned 2019 GMC Sierra.

Distinguished by bold design and segment-leading technologies, the next generation Sierra Denali once again redefines the premium pickup, while advancing Denali’s legacy as the pinnacle of GMC design, capability and refinement.

The next generation 2019 Sierra debuts a GMC exclusive, industry-first MultiPro Tailgate that is the segment’s most innovative tailgate ever. Standard on SLT and Denali, the MultiPro Tailgate features six unique functions and positions, offering enhanced second-tier loading and load-stop solutions, a standing workstation mode and easier access to items in the box.

New versions of the proven 6.2L and 5.3L V-8 engines will be joined by an all-new 3.0L inline-six turbo-diesel engine, expanding the powertrain lineup for the 2019 Sierra. The 5.3L and 6.2L engines feature stop/start technology and new Dynamic Fuel Management that enables the engine to operate on one to eight cylinders, depending on demand, to optimize power and efficiency. The new diesel builds on GMC’s expertise with Duramax turbo-diesels offered in Sierra HD and Canyon models. The available 6.2L and 3.0L engines are paired with a 10-speed automatic transmission.

Sierra Denali features an exclusive Adaptive Ride Control suspension system designed to provide premium driving refinement with exceptional responsiveness. It employs sophisticated sensors to monitor road conditions and chassis responses in real time, enabling adjustments to active dampers every 2 milliseconds. The 2019 GMC Sierra Denali and SLT go on sale this fall. Additional details will be released closer to the start of production.

If you love cars you should subscribe now to YouCar the world famous automotive channel: https://goo.gl/5i54Vg

5/06/18

2019 Chevrolet Silverado 6500HD Unveil at The Work Truck Show



Ed Peper, U.S. vice president of General Motors Fleet, talks about the new Chevrolet Silverado 6500HD at the Work Truck Show in Indianapolis, bringing Chevrolet back into the medium-duty commercial truck market.

 Read more about the three new medium-duty commercial trucks: http://www.worktruckonline.com/news/s...

5/04/18

WeldMaster Truck Body - For the Jack of All Trades!


The urban welder is a jack of all trades. A little of this, and a little of that. And, of course, his or her work always includes some welding. Harbor created a jack of all trades truck just for her or him.  A service body with a welders edge!
  • 63-inch raised and vented front compartment with bottle brackets and rings inside to hold standard sized oxygen and acetylene tanks
  • Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
  • Push Button locking system with red band locking indicator
  • Modern gas shocks on each side opening door to keep them open during loading and unloading
  • 8" deep recessed bumper for sure footing when entering bed
  • Armless and self supporting tailgate work table
  • Adjustable, but lockable, shelving system
  • Weather shield system around locks, doors, and hingles, preventing leaks and securing the tools of your trade. Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.

5/02/18

Amazon Packages Can Now Be Delivered to More Than 7 Million Chevrolet, Buick, GMC and Cadillac Vehicles


Amazon Key In-Car Delivery offers customers a convenient, time-saving way to receive packages inside their vehicle
 
DETROIT – (NYSE: GM) Starting today, more than seven million owners of eligible Chevrolet, Buick, GMC and Cadillac vehicles in the United States can enjoy the convenience of having Amazon packages delivered inside their vehicle using Amazon Key. In-Car Delivery comes at no extra cost for Amazon Prime members with an active OnStar account and is available in 37 U.S. cities and surrounding areas, with more cities to follow.

“Partnering with Amazon to leverage our embedded in-vehicle connectivity gives Chevrolet, Buick, GMC and Cadillac owners the option to conveniently receive deliveries inside their vehicle parked at home, work or near other locations in their Amazon address book,” said Alan Batey, President, General Motors North America. “This is another example of how we provide customers with technologies that add value and enhance the ownership experience.”

With Amazon Key In-Car Delivery, packages can be delivered to a vehicle when it’s parked in a publicly accessible area, such as on the street in front of an apartment building, at a workplace surface parking lot or in a home driveway. Delivery is available on tens of millions of items sold on Amazon.com and works with Same Day, Two-Day and Standard Shipping.

“At Amazon, we are always working to make our customers’ lives easier and starting today, we’re excited to bring in-car delivery to Chevrolet, Buick, GMC and Cadillac owners,” said Peter Larsen, Vice President of Delivery Technology, Amazon. “Prime members now have another way to ensure their packages are safe and secure—all for no additional cost.”




Setting up Amazon Key In-Car Delivery is easy. Customers must download the Amazon Key App and opt in to seamlessly link their Amazon and OnStar accounts. Once the first step is complete and the delivery location has been registered, customers can shop on Amazon.com and select the “In-Car” delivery option at checkout. Additional eligible delivery addresses can be added to the Amazon address book at any time.

Customers receive a notification via the Amazon Key App when the delivery is on its way and after the delivery is completed and the vehicle is relocked. Deliveries are made to a stationary car parked in a publicly accessible area.

Amazon Key In-Car Delivery requires a 2015 model year or newer Chevrolet, Buick, GMC and Cadillac vehicle. Visit onstar.com for coverage map, details and system limitations. To check eligibility and sign up for Amazon Key In-Car Delivery, visit www.amazon.com/keyincar.

GMC has manufactured trucks since 1902, with innovation and engineering excellence built into all GMC vehicles. The brand is evolving to offer more fuel-efficient trucks and crossovers, including the Terrain small SUV and Acadia crossover. GMC’s highest-volume vehicle, the Sierra pickup, is the most powerful light-duty pickup on the market, and the first full-size pickup to receive the highest-possible five-star Overall Vehicle Score for safety since the National Highway Traffic Safety Administration changed its New Car Assessment Program for the 2011 model year. Details on all GMC models are available at http://www.gmc.com/, on Twitter at @thisisgmc or at http://www.facebook.com/gmc.